Angle steel line - Angle iron punching production line Jinan Guangxian JNC15203 CNC angle steel production line shear unit adjustment method

The shearing unit of the CNC angle steel production line is a production unit used for cutting the blanks of angle steel after marking and punching. Before using the production line for mass production, operators should check the status of each part of the shearing unit and adjust it in time, which can ensure high-quality shearing production and reduce the wear rate of shearing tools and production costs. The adjustment method of the shearing unit of Jinan Guangxian JNC12503 CNC angle steel production line is as follows:

The shearing unit of the CNC angle steel production line is a production unit used for cutting the blanks of angle steel to a fixed length after marking and punching. Before using the production line for formal mass production, operators should check the status of each part of the shearing unit and adjust it in time, which can ensure high-quality shearing production and reduce the wear rate of shearing tools, thus lowering production costs. The adjustment method of the shearing unit of Jinan Guangxian JNC12503 CNC angle steel production line is as follows:

The shearing unit adopts single-blade shearing with two stationary blades and one moving blade. The cutting edges are all 90°, and the cross-sections of the two parts of the cut angle steel are flat and smooth, avoiding waste.

After one end of the moving blade of the production line becomes dull, the fixing screws can be unscrewed, and after removing it, it can be rotated 180° to use the other side for processing, saving the cost of using the shearing die.

When it is found that the stationary blade of the angle steel production line shearing unit becomes dull and needs to be replaced or reground, the hexagon socket screw in the lower blade can be removed, and the two stationary blades can be removed. Each stationary blade has four cutting edges, which can be used repeatedly four times. Adjust the blade orientation, and refasten it before use.